CANON EOS 55 QD – IN THE LAND OF HEARTQUAKES (Part Two) – Trix pushed @ 800

002_EOS55QD_Trix_023

As mentioned in the previous post on the Canon 55 Qd, I went back after a year, in some of the places affected by the disastrous earthquake of 2009 in L’Aquila. This time, I used the camera with the 50mm f/1.8 II lens in some locations where the light was very poor. That’s why I had to push the Kodak Trix @ 800 Iso and in spite of that, in some cases, I had to use very slow speeds handheld. The results, however, do not seem despicable at all.

Continue reading

Advertisements

Pushing Ilford Delta 400 in DD-X with Olympus XA4

003_xa4_delta_at1600004

These days I am quite busy (even testing and optimizing my new Darkroom and enlargerss) and then I had little time to shot and develop. But I can not overlook this blog too. So I’m writing this quick post with some results from a roll of Ilford Delta 400 Professional pusheded to 1600 ISO and developed in DD-X. This time I used the Olympus XA4. Nothing particularly new for this blog, but it’s always a pleasure to share our film experiences … 😉

Continue reading

Ilford Delta 400 Professional Pushed to 1600 Iso in Ilfotech DD-X

002_Delta400@1600_OM10_024

For several months now I have started to frequently use the Ilford Delta films, and also the Ilford Ilfotech DD-X as a developer. I always got good results exposing the Delta @ box speed, but also, for example, “pushing” the 400 to 800 ISO, as you can see in this post. Given these results, I wanted to go even further and so, I loaded my Olympus OM 10 with a roll of Delta 400 and set the meter on the 1600 Iso value.

Continue reading